1.5050SMD 28.8W/M 120led rgbw led ribbon lights 24V tube around c best rgbw led strip
2.Product introduction of the 5050SMD 28.8W/M 120led rgbw led ribbon lights
5050SMD 28.8W/M 120led rgbw led ribbon lights 24V tube around c best rgbw led strip.
It was made up with Copper PCB +LEDs.
RGB+5050white rgbw double row strips, led strips can be cut by 3or 6 LEDs for DC 12v or 24v, which with RoHS and CE certificated, can be exported all over the world, our led strips with super brightness and long lifesapan 50,000 hrs.
3.Product specification of the 5050SMD 28.8W/M 120led rgbw led ribbon lights
Double-Row, RGB+5050 White / Warm White strip
Red & Green & Blue & White/ Warm white
RGB+5050white, double row strips
White PCB ( yellow and black available)
IP20 & IP65 Tube around Waterproof avaiable
5 m/roll (10 or 25meters/roll available)
4.优点及应用 Product Feature And Application of the 5050SMD 28.8W/M 120led rgbw led ribbon lights
•5050 RGBW SMD Standard Flexible LED Strips Lights, 5M/Roll;
•Working voltage: DC12V or DC24V ;
•Cuttable length: by every 3/6 leds ;
•Non-waterproof & Waterproof : IP20 & IP65 & & IP67 & IP68 ;
•With 3M adhesive tape back(IP20&IP65),easy for installation;
•Color: RGBW/ RGBWW Can be controlled;
•Working temperature and Storage temperature:-20℃ - 50℃.;
•Anti-oxidation, anti-UV radiation and won't change color after long time use;
•High flexibility ,flame-proof and environmental friendliness.
1.Indoor decoration lighting
2.Outdoor landscape lighting
3.Concerts, Dance halls, Birthday,Weddings, Party, Holiday, Celebration and other decorative occasions
Keylux lighting Co., LTD
Q1. Do you have Strict Quality Control?
A: We have a strict quality control system from raw material to finished led strips.Each step must pass strict inspection, strive to produce superior products
Q2. Do you have Incoming Raw Material Inspection?
A: Comparing incoming raw material and sealed sample in terms of class, quality grade, technical data, ensuring the consistency with purchasing requirements, thus guarantee the ensuing manufactured product fulfilling customers’ requirements.
Q3. How about your Led Drying?
A: Leds will absorb humidity when exposed to air, which requires 24H drying before SMD
Q4. What about the process of your Light-on Test after SMD?
A: After pasting of leds onto the PCB board, each strip panels will be powered to see if any insufficient soldering, slanted leds, and dead leds, if yes, they have to be repaired until qualified; if no, then flowing to the next stream
Q5. How about your Light-on and beating test?
A: Strips after SMD (0.5M) should be soldered to 5M roll, after which they have to be lighted again to check if any dead leds, and together with beating test to see if leds fixed tight on pcb board.
Should the 5050smd 28.8w/m 120led rgbw led ribbon lights 24v tube around c best rgbw led strip caters to your needs, welcome to buy with our factory. As one of the leading manufacturers and suppliers of various LED products in China, we will also offer you the customized service.