1.Triangle corner led aluminum profile led modules for channel letters
2.Product introduction of the Triangle corner led aluminum profile
Triangle corner led aluminum profile led modules for channel letters.
It was made up with Aluminum 6063-T5+PC cover+end caps+clips.
We specialized in led aluminum extrusionl for many years, covering most of Europen, American, and Asian market, we have strict QC dept to inspect 100% goods before shipment, we promise always offer the good quality goods to our customers, we hope do long time business with every cutsomers
3.Product specification of the Triangle corner led aluminum profile
Detail Parameters:
Model | TED001P06 |
Size | 26.9X19mm |
Material | 6063 T5 Aluminum Alloy |
Finished | Anodized |
Standard length | 0.5m, 1.0m, 1.5m, 2.0m, 2.5m, 3.0m |
Special length | Acceptable |
Inside width for strip | 5-11mm width |
Cover Solution | Clear/Frosted/Milky PC Cover |
Cover Material | PC |
Installation | Surfaced Mounted For Corner |
A set Contents | Alu profile + PC cover + clips + end caps |
Package | Inner PP bag, Outer Carton Package |
Delivery time | 3-7 days after deposit |
Warranty | 2 years |
4.Product Feature And Application of the Triangle corner led aluminum profile
Features:
led aluminum extrusion Designed for flexible and hard led strips
led aluminum extrusion with Excellent heat dispersion
led aluminum extrusion Makes flex strip more elegant
Surmountor led aluminum extrusion 's Accessories are well-quipped and complete
led aluminum extrusion Packed with EPE in carton carefully .
Application:
a. Surmountor led aluminum profiles can be applied to furniture (kitchen/office)
b. Surmountor led aluminum profiles for nterior light design (stairs/storage/floor)
c. Surmountor led aluminum profiles applied to stores shelf LED lighting
d. Surmountor led aluminum profiles can be use to independent LED lamp
e. Surmountor led aluminum profiles are suitable for exhibition booth LED lighting
f. Surmountor led aluminum profiles can be heat sink and physical protection to the LEDs
5.FAQ
Keylux lighting Co., LTD
Q1: What is the difference between anodized and mill finished?
A: Mill is the raw state of aluminum as extruded - no surface treatment. Anodized (also
known as Satin Clear or Clear Anodized) is an electrolytic process. This process increases
corrosion resistance and weather resistance.
Q2: What About Anodizer Rack Marks?
A: Electrical contact must be made to each part to be anodized. The more electrical
current required, the greater the electrical contact. The size of the contact therefore
depends on the anodizing process and the size of the part being anodized.
Q3. What is your closest sea-port ?
A: Shenzhen city Sea Port .
Q4. Could you assemble the led strip and led aluminum profile?
A:Sure, we'd like to assemble led strip and profile for you. labor cost is necessory if your quantity does not reach to MOQ.
Q5. What accessories can you offer?
A: Accessories: end caps, mounting clips/suspending rope, screws and so on.
Should the triangle corner led aluminum profile led modules for channel letters caters to your needs, welcome to buy with our factory. As one of the leading manufacturers and suppliers of various LED products in China, we will also offer you the customized service.